Une partie de la critique a été traduite automatiquement.
Meilleur magasin
bem embalada com manual de instruções. minha filha adorou. desenhando muito
It is quite good and was able to put it to use in a short amount of time. Speed and temperature adjustment is very useful. But there are few shortcomings: 1. the stand is too light, thus cable can pull the pen down. 2. Cable for the power adapter is very short (not very difficult to extend) 3. It seems that there is a continuous operation mode, which I activated accidentally, but it is not written how in the document. 4. Button is quite hard to press, especially for little ones.
Заказывал как подарок на новый год, доставили прямо тютелька в тютельку 29 декабря. В работе пока не проверили.
The pen is incredibly easy to set up for usage and temps. What's not so easy is if you have a jam inside the PTFE tubing inside. There are no instructions on how to get it apart to un-clog it. I found the head rarely, if ever, clogs, but when backing out the filament, don't ever pause, just keep the button pressed until it comes out. The extruder doesn't seem like it has a lot of driving force, almost seems like it's underpowered. But it extracts fairly quickly. Ultimately I got the pen for "gluing" PLA parts together. And for that purpose it works extremely well. It heats up in half a minute.