Reviews des clients

4.94 sur 5
Ecrire un commentaire
  • Tous les Commentaires (260)
  • Image (39)
  • Vidéo (0)
  • Toutes les Étoiles
    • Toutes les Étoiles(260)
    • 5 Étoile(248)
    • 4 Étoile(9)
    • 3 Étoile(2)
    • 2 Étoile(1)
    • 1 Étoile(0)
Trier par:
Commentaire Top
  • Commentaire Top
  • Le plus utile
  • Le plus récent
  • July-24 2020 12:07:48

    Соответствует описанию

  • January-30 2020 10:01:19

    Comes with additional parts, good quality , very fast delivery - 14 days from order, that's amazing. Definitely I can recommend it !!

  • June-14 2020 08:08:42

    Отличный корпус

  • November-05 2020 14:40:03


  • October-03 2017 13:35:01

    la cover si adatta perfettamente al circuito, ma bisognerebbe apportare delle modifiche alla scocca, come ho fatto. 1) inserire un terzo polo centrale per poter collegare anche il pin 2 2) inserire nel kit una femmina jack 3.5mm per poter collegare l' ingresso "F in" 3) inserire nel kit una clip per pila 9v

  • May-25 2016 16:24:06

    Купил себе конструктор тестера транзисторов на M328 с графическим дисплеем и энкодером. Долгое время искал к нему корпус. Нашел в этом магазине. Устроило по виду и цене. Цена лучше чем на Ali и Ebay, решился заказать. Покупкой очень доволен. Корпус сделан качественно, в комплекте все

  • April-05 2016 21:32:44

    This case is nice but it don’t seem to be manufactured for this component tester. It has many drawbacks. But with a little work is can work great. The first thing I noticed was there wasn’t any output for the function generator. Then the counter needed to have some strange arrangements of pin2 and 3 of the connector. Not to mention the connector is very low quality and won’t last very long with use. The two holes for the banana plugs is much larger than the plugs provided and so makes it

    Commentaires (1)
  • May-16 2018 12:06:06

    Boîtier sympathique parfaitement adapté à l'appareil de test composants. Montage simple et rapide. Très satisfait. Les photos ont été faites appareil assemblé avec l'électronique.

  • February-12 2016 14:06:31

    Perfect for the job. This was not designed to accommodate the surface mount testing area of the testing PCB or the frequency counter, so I modded it and threw in a DC power jack and a switch to totally shut off the juice from the battery too. Sadly I did not prepare for the banana jacks melting, but I should have planned ahead and inserted banana plugs with heavy gauge wire to sink the heat, oh well, I am still happy.

  • August-17 2019 11:55:30

    I had fun putting this together with the main module. Note the case ships with two 7-way sockets that need to be soldered in place of the ZIF socket (then insert the ZIF into these standoffs) in order to raise the socket to the correct height to clear the case! The main kit ships with a green socket that appears to have gold-plated contacts. The case ships with a black socket but it seems to have nickel contacts, So I chose to use the green one. The rotary encoder shaft will protrude just the correct


    Go to page


    Vous pourriez être intéressé par

    recommendation for you
    • 4,22€
    • 6,70€
    • 3,37€
    • 7,60€
    • 31,28€
    • 13,52€
    • 3,37€
    • 7,60€
    • 25,81€
    • 3,37€
    • 5,06€
    • 5,06€
    • 11,83€
    • 14,37€
    • 10,73€
    • 22,01€
    • 5,06€
    • 3,97€