Avis des clients

Ecrire un commentaire
  • Tous les Commentaires (499)
  • Image (64)
  • Vidéo (4)
  • Toutes les Étoiles
    • Toutes les Étoiles(499)
    • 5 Étoile(467)
    • 4 Étoile(25)
    • 3 Étoile(3)
    • 2 Étoile(1)
    • 1 Étoile(3)
Trier par:
Commentaire Top
  • Commentaire Top
  • Le plus utile
  • Le plus récent
Avis uniquement de votre pays (France)
|
Afficher l'original

Une partie de la critique a été traduite automatiquement.

  • 26/12/2020

    Accroché à un DIYMore Pro Mini Strong (Arduino pro mini clone), modifié l'exemple exemple d'exemple Adafruit NeoMatrix et tout fonctionne bien. Très lumineux sur la pleine luminosité. Maintenant en attente de plus de panneaux pour faire un affichage carrelé...

    Commentaires
    Afficher l'original
  • 13/11/2016

    Very very bright leds on a nice soldered board. I had troubles getting it to work with the examples from ADAFRUIT. Turned out that the pin labled 'DIN' on the board is NOT the data input !!!. After changing it to the 'DOUT' pin everything worked fine. Maybe this would be a nice addition to the product description.

    Commentaires (2)
    Afficher l'original
  • 05/03/2020

    C'est super.

    Commentaires (1)
    Afficher l'original
  • BDRVIP5
    HU
    12/10/2020

    Excellent produit. Je vous remercie!

    Commentaires
    Afficher l'original
  • 04/03/2018

    Come descritto altrove i pin sono al contrario ma il prodotto funziona perfettamente li ho presi per fare una lampada da tavolo con colori e luminosità variabile controllata da telefono ma sono rimasto stupito dalla quantità di luce che generano , li ho dovuti regolare al minimo xche al massimo arrivano ad assorbire 1ah a pannello a 5v e la luce è troppa

    Commentaires
    Afficher l'original
  • 11/08/2017

    I was beginning to think all the boards were bad but it turns out the rear silk mask has din and dout reversed. be nice if that was mentioned in the product description!

    Commentaires
    Afficher l'original
  • 23/03/2017

    I purchased the "CJMCU 64 Bit WS2812 5050 RGB LED Driver Development Board" from Banggood.com on March 2, 2017. I was very disappointed at first that I could not get this LED matrix to function, no matter how I wired it to my Arduino Uno (or Nano) and no matter what sketch I wrote or used. Nothing I did could get it to work. Testing the individual WS2812 LEDs showed no problems, but I did notice that the front of the CJMCU-8*8 board had printed labeling showing "WS2812B-64 RGB LEDS". This was clearly incorrect as it was obvious from just looking at the individual 6 pin LEDs that they were in fact WS2812's, which they were supposed to be, so the "WS2812B" label was a printing error. This made me suspicious of the quality assurance (or lack thereof) of the manufacturer of this product. When I continued my visual inspection of this board by turning it over, I discovered a very disturbing issue with the board and the cause of my inability to get it to function properly. The back of the board was also incorrectly printed. The entire printed surface of the board was printed upside down. This caused the individual markings on the back of the board to be reversed. Not much of a problem for the name "CJMCU-8*8", but a big problem for the 6 pin labels. Since the board was printed upside down, the pin labels were reversed and the DIN pin was incorrectly marked as "DOUT" and vice-versa for the DOUT pin, which was erroneously labeled as "DIN". This caused me to hook up the board incorrectly, trying to power and control the WS2812 LED's from the wrong side. No mystery that it never lit up that way. As soon as I connected my inputs to the pins that were mistakenly marked as "outputs" it worked just fine. Since then the board has worked well, so I am just disappointed that I wasted so much time trying to figure this problem out. It seems that other people have had the same problem with this matrix board and it continues to be shipped this way, so I probably should've checked the comments on the BG web site before I wasted my time troubleshooting it. I hope future purchasers of this item will read this, examine the board they receive and save themselves from similar frustration. I have included two photos that graphically demonstrates the problem cause by this printing error.

    Commentaires (2)
    Afficher l'original
  • 06/12/2020

    Grande valeur dans le souhait de vente que vous pourriez les obtenir en groupe acheter ou acheter en vrac juste ordre 9 sera commander un autre 12 conseils pour d'autres projets

    Commentaires
    Afficher l'original
  • 05/06/2021

    Livraison quelques jours plus tôt que prévu, article emballé dans un sac en plastique antistatique. Travailler bien avec les bibliothèques connexes, couleurs vives. Je peux le recommander !

    Commentaires
    Afficher l'original
  • 05/11/2020

    Super panneau. Je l'ai fait fonctionner en quelques minutes avec la bibliothèque Neopixel. Très brillant.

    Commentaires
    Afficher l'original
Show:

    Total 0 pages

    Aller à la page

    Vous pourriez être intéressé par

    recommendation for you
    • 9,19€
    • 9,19€
    • 7,35€
    • 4,22€
    • 4,22€
    • 6,34€
    • 4,22€
    • 10,57€
    • 33,98€
    • 127,83€
    • 3,67€
    • 11,95€
    • 4,59€
    • 5,28€
    • 5,51€
    • 5,51€
    • 20,22€
    • 15,32€