Perfeito...vem com 3 pares de pinos diferentes. Muito bom.

Perfeito...vem com 3 pares de pinos diferentes. Muito bom.

Perfeito...vem com 3 pares de pinos diferentes. Muito bom.

I was able to get this to work with my Wemos D1 minis *after* I added a pull-down resistor (1k or 2.2k or 10k, etc) to D8 (GPIO15/SS). If you don't do this, then the D1 mini won't boot. https://wiki.wemos.cc/products:d1:d1_mini But the fix is simple -- just solder a pull-down resistor between D8 and Gnd. I've included a picture of one of the boards I modified (the soldering job is really a hack -- it was just a proof-of-concept; I'm probably going to try to use a surface mount resistor in the end).

I was able to get this to work with my Wemos D1 minis *after* I added a pull-down resistor (1k or 2.2k or 10k, etc) to D8 (GPIO15/SS). If you don't do this, then the D1 mini won't boot. https://wiki.wemos.cc/products:d1:d1_mini But the fix is simple -- just solder a pull-down resistor between D8 and Gnd. I've included a picture of one of the boards I modified (the soldering job is really a hack -- it was just a proof-of-concept; I'm probably going to try to use a surface mount resistor in the end).

I was able to get this to work with my Wemos D1 minis *after* I added a pull-down resistor (1k or 2.2k or 10k, etc) to D8 (GPIO15/SS). If you don't do this, then the D1 mini won't boot. https://wiki.wemos.cc/products:d1:d1_mini But the fix is simple -- just solder a pull-down resistor between D8 and Gnd. I've included a picture of one of the boards I modified (the soldering job is really a hack -- it was just a proof-of-concept; I'm probably going to try to use a surface mount resistor in the end).

Joli ajout à mon mini D1

Nice addition to my D1 mini

Joli ajout à mon mini D1

antistatic package. looks good.

antistatic package. looks good.

antistatic package. looks good.

Article tel que décrit.

Item as described.

Article tel que décrit.

une petite chose mais fonctionne ok

a little thing but works ok

une petite chose mais fonctionne ok

This d1 mini shield was the last one I needed to complete the kit I put together. As with all the other ones I had previously purchased,I soldered it up and it worked like I new it would. 👍

This d1 mini shield was the last one I needed to complete the kit I put together. As with all the other ones I had previously purchased,I soldered it up and it worked like I new it would. 👍

This d1 mini shield was the last one I needed to complete the kit I put together. As with all the other ones I had previously purchased,I soldered it up and it worked like I new it would. 👍

thx

thx

thx

Well packaged and excellent delivery time (9 calendar days from order). A Micro SD card is a great way of adding a data logging capability to any MCU project. I am happy to recommend these items.

Well packaged and excellent delivery time (9 calendar days from order). A Micro SD card is a great way of adding a data logging capability to any MCU project. I am happy to recommend these items.

Well packaged and excellent delivery time (9 calendar days from order). A Micro SD card is a great way of adding a data logging capability to any MCU project. I am happy to recommend these items.

Je n'ai pas encore utilisé, mais ça a l'air bien. Aucune information incluse.

haven't used yet, but looks good. No information included.

Je n'ai pas encore utilisé, mais ça a l'air bien. Aucune information incluse.