Une partie de la critique a été traduite automatiquement.
Très bon.
These are really nice, and they provide a stable power source at 3V3 and 5V. However, the switch does not appear to have any effect on the power supplied on the solder pads. As such, I'm not sure the undercurrent protection works when using those. I'm using protected 18650 batteries so I don't really care.
Comme décrit. Entièrement chargé.
est arrivé en bon état. J'espère qu'ils fonctionneront comme décrit. La meilleure façon d'alimenter un projet arduino.
produit très utile
ok ok ok non testé
Ce module est si grand! 5 et 3.3 v d'une cellule LiON. Je l'adore. Merci!!
Reçu tôt et bien emballé, chacun dans son propre sac anti-statique. Sera utilisé pour alimenter certains microcontrôleurs pour divers projets. D'autres commentaires sont corrects que le commutateur ne tourne port USB sur / off. Vous pouvez le voir si vous suivez les pistes sur le circuit imprimé. (Conseil - Vous devriez regarder attentivement et inspecter tous les nouveaux articles électroniques que vous utilisez.) L'unité semble être très bien faite et tous les composants sont bien soudés et clairement étiquetés. La façon dont je prévois les utiliser ne nécessitera pas une base, mais vous pouvez l'envisager pour les espaces exigus ou les applications qui nécessitent qu'il soit déplacé beaucoup, frappé autour, ou si l'unité sera exposée à une humidité élevée. Les différentes sorties acceptent les broches d'en-tête facilement. Grande valeur pour l'argent si vous obtenez 5 paquet d'unité. Très heureux et satisfait!
Already bought five units over four months ago. They all work great, for Arduino projects, led lights, a quick 3.3v / 5v power supply using a single 18650 Samsung 30Q flat top battery. Two drawbacks, 1. SMD components on the bottom of the PCB can be shorted out and get broken off, so you need to add a base plate. A thin piece of wood of plastic. 2. Flat top batteries have a hard time making a good electrical connection. A. need to bend the battery contacts in towards the battery compartment or, B. add a 4x2mm disk magnet to the positive end of the battery or, C. or solder a small brass washer to the positive end of the battery or, D. use button top 18650 batteries. This will help a lot in making the dc to dc step up buck converter more reliable.
Correcte