Reviews des clients

4.96 sur 5
Ecrire un commentaire
  • Tous les Commentaires (433)
  • Image (43)
  • Vidéo (1)
  • Toutes les Étoiles
    • Toutes les Étoiles(433)
    • 5 Étoile(415)
    • 4 Étoile(18)
    • 3 Étoile(0)
    • 2 Étoile(0)
    • 1 Étoile(0)
Trier par:
Commentaire Top
  • Commentaire Top
  • Le plus utile
  • Le plus récent
  • athos
    2019-11-10 12:40:23

    One in three does not work. the circuit of this one is different from the other two as shown in the second image. I needed three functional ones.

  • 2020-01-17 11:33:47

    Immer wieder gerne gekauft. Tolle Netzteile in kleinstem Format und guter Leistung.

  • 2017-09-13 11:02:37

    I tested it with a 12Vdc power source and all the 3 power supply circuits work like a charm. the voltage adjustment is easy. satisfied and suggested ho testato i 3 circuiti con una sorgente a 12Vdc e tutti e 3 hanno funzionato perfettamente. la regolazione con trim multigiri è OK. soddisfatto e suggerito come acquisto

    Commentaires (1)
  • Geos
    2017-10-17 13:17:26

    The product comes in antistatic bags. I tested all three of them and work perfect! I connected in 12V to 15V DC Power Supply as Input Source, I’ adjusted for 5V Output and connected in 2.2A load. Works Very Good, I measure a little bit of noise (20 – 35 mVpp) in the Output but this is right for this switch type converters. Quick tip: connect an Inductor same type as that who is mounted in the board in series with the (+) of output, and then connect a couple of capacitors (one 100uF Electrolytic

  • 2018-01-14 14:57:19

    This step down converter has very good efficiency! Compared to other products rated at "3 to 4 amp" this has 92% efficiency (the weaker ones with LM2496 only get 81%). Tested using 10,5 Volt input and 7 Volt output at 1.93 amps. You can see in the picture it has plenty of room for more power as it is not getting very hot even without any heat sink or moving air.

  • Rog77
    2017-08-29 21:50:28

    These are a very handy stable voltage converter. I mainly use them for 5V USB or similar devices that I want to power from my 12V house DC or a car battery. They generate a little noise of course, but if put into a di-cast box with ferrite beads on the leads in & out they're pretty good if you run HF radios in the area.

  • kitowed
    2016-05-23 08:43:51

    Work fine. Good soldering. Starts warming at 3A. Got holes for mounting. The are is no current limits. Хорошое исполнение. Начинает нагриватся при 3А. Есть два отверствия для крипежа. Жаль что НЕТ ограничения тока. Подходит для простого блока питания

  • Mirda
    2017-11-17 16:46:13

    Very stable and precisely adjustable DC convector. the best I've ever used.

  • kunder
    2017-09-24 09:18:33

    Useful product! I used adjust V from 3.7v lithum -ion battery to 3.0 v ,so lightting my LED bulb.See my pic.

  • JoseMC
    2017-03-14 07:15:17

    Perfecto para conseguir voltajes intermedios a partir de una fuente de alimentación ATX, soporta hasta 5A y es muy chiquitin.


    Go to page


    Vous pourriez être intéressé par

    recommendation for you
    • 5,13€
    • 4,11€
    • 3,42€
    • 2,56€
    • 8,55€
    • 14,37€
    • 4,73€
    • 2,56€
    • 3,42€
    • 1,71€
    • 8,47€
    • 15,42€
    • 6,15€
    • 8,56€
    • 3,63€
    • 10,79€
    • 7,24€
    • 13,70€