Avis des clients

Ecrire un commentaire
  • Tous les Commentaires (47)
  • Image (2)
  • Vidéo (0)
  • Toutes les Étoiles
    • Toutes les Étoiles(47)
    • 5 Étoile(45)
    • 4 Étoile(2)
    • 3 Étoile(0)
    • 2 Étoile(0)
    • 1 Étoile(0)
Trier par:
Commentaire Top
  • Commentaire Top
  • Le plus utile
  • Le plus récent
Avis uniquement de votre pays (France)
|
Afficher l'original

Une partie de la critique a été traduite automatiquement.

  • 05/05/2022

    bien

    Commentaires
    Afficher l'original
  • 07/06/2018

    good product I install this in print3d for adjust the leds

    Commentaires
    Afficher l'original
  • 23/08/2018

    We have tested three of these PCB's with a voltage of 30 Vdc and a load of 10 ohms. Unfortunately, we are unable to test this PWM print under the specified full load of 90 W at 35 V power supply. But if we extrapolate the results of our test at 30 V and 75 W, we are convinced that this print will function well under full load. If we take the incident with one bursting thermal fuse as an accidental defect, due to a part with a manufacturing fault, we can decide that this extremely cheap power regulator does what it is supposed to do. If you have to regulate the power of DC voltages up to 30 V and 3 A, this PCB is recommended.

    Commentaires (1)
    Afficher l'original
  • 04/12/2017

    I use these with a 12V power supply, and there is very little loss, thereby allowing almost full voltage at the maximum setting. I use them with dew heaters to keep my telescope optics from fogging or frosting during observing sessions.

    Commentaires
    Afficher l'original
  • 27/11/2017

    Controller is tested by concerting to 12 VDC PSU and loading with a small DC motor. Speed was controllable from zero to approx. 6000 RPM in apparently linear fashion, i.e. RPM was proportional to angle of the potentiometer shaft. Enough torque was developed over the whole RPM range, even at extremely slow speed.

    Commentaires
    Afficher l'original
  • 02/05/2022

    bonne unité de commande de moteur avec coupe

    Commentaires
    Afficher l'original
  • 27/11/2021

    Spot sur

    Commentaires
    Afficher l'original
  • 23/08/2021

    Ça marche parfaitement.

    Commentaires
    Afficher l'original
  • 07/04/2021

    Bon produit.

    Commentaires
    Afficher l'original
  • 11/02/2021

    Ça marche parfaitement.

    Commentaires
    Afficher l'original
Show:

    Total 0 pages

    Aller à la page

    Vous pourriez être intéressé par

    recommendation for you
    • 10,61€
    • 7,92€
    • 6,86€
    • 4,59€
    • 5,51€
    • 10,61€
    • 8,27€
    • 57,93€
    • 14,71€
    • 36,78€
    • 17,47€
    • 35,86€
    • 52,97€
    • 27,21€
    • 22,20€
    • 6,43€
    • 21,14€
    • 8,27€