Avis des clients

Ecrire un commentaire
  • Tous les Commentaires (342)
  • Image (41)
  • Vidéo (0)
  • Toutes les Étoiles
    • Toutes les Étoiles(342)
    • 5 Étoile(329)
    • 4 Étoile(9)
    • 3 Étoile(3)
    • 2 Étoile(1)
    • 1 Étoile(0)
Trier par:
Commentaire Top
  • Commentaire Top
  • Le plus utile
  • Le plus récent
Avis uniquement de votre pays (France)
|
Afficher l'original

Une partie de la critique a été traduite automatiquement.

  • 05/05/2017

    Small but very bright! To attack it to the radiator I use a good thermal conductive glue, that I bought here: http://www.banggood.com/STARS-922-CPU-GPU-Thermal-Silicone-Grease-Compound-Glue-p-1136461.html?p=D3040313149142015035

    Commentaires
    Afficher l'original
  • 15/12/2017

    These are nice and bright leds. Not 3w but bright enough for me. For prolonged use you should put them on a heatsink: http://bit.ly/2BqtDoN

    Commentaires (1)
    Afficher l'original
  • 09/05/2015

    I have not been able to find any legible manufacturing data markings on these, but they seem to conform to the following generic LED bead characteristics of other products listed on the internet: 3.2-3.5 Volt drop 750-800mA current To design a custom circuit, you can put in those parameters into the LED calculator web page (below) and get a sample circuit and required parts list for different DC voltage driver units: http://ledcalculator.net You will likely need heat sinking for the LED if you run it at the rated capacity of 3W. I am designing a custom lighted sign for my cabin, and am getting suitable brightness (for my purposes) using a 12VDC supply, 2 of these LED beads in series with a 75 ohm current-limiting resister (1+ Watt rating)... This runs cool to the touch without heat sinking, but note that it is WELL below the rated capacity of this LED. A similar circuit running at rated capacity would use a 4+ watt, 6.8 Ohm current-limiting resistor vs the 75 Ohm one I am using. The polarity (+/-) of the bead is stamped on the soldering lead... it's tiny, but there.

    Commentaires (1)
    Afficher l'original
  • 25/02/2018

    These are nice and bright leds. Not quite 3w but bright enough for me. For prolonged use you should put them on a heatsink: http://bit.ly/2BqtDoN

    Commentaires
    Afficher l'original
  • 10/10/2017

    These LED's are not as bright as I expected. Very disapointed. At 3.3V only take 125mA, so I make that about 0.4 of a WATT, no where near to what they should be. Not good enought for my fish tank/s, which is what I brought them for... Can you supply better??? What can you do useless?. Where do you get 3WATTS from??

    Commentaires
    Afficher l'original
  • 23/01/2020

    assez de ceux - ci peuvent vous rendre aveugle. très lumineux.

    Commentaires
    Afficher l'original
  • 23/04/2019

    Great product. Very Good Quality ,enormous light....just splendid !!! Some heat dissipation is needed at full power....see pictures. Plus and minus are indicated on the Led's. These power LED's are used in many applications (spot lights ,microscopes ,etc) . Recommended !!!

    Commentaires (1)
    Afficher l'original
  • 30/01/2018

    Fonctionnent très bien.

    Commentaires
    Afficher l'original
  • 03/12/2017

    Delivery on time. The product is satisfactory.

    Commentaires
    Afficher l'original
  • 09/03/2021

    Selon l'annonce

    Commentaires
    Afficher l'original
Show:

    Total 0 pages

    Aller à la page

    Vous pourriez être intéressé par

    recommendation for you
    • 13,80€
    • 13,76€
    • 7,35€
    • 30,34€
    • 7,35€
    • 21,14€
    • 5,51€
    • 13,79€
    • 6,89€
    • 9,51€
    • 6,18€
    • 15,61€
    • 8,49€
    • 13,80€
    • 9,51€
    • 13,38€
    • 12,74€
    • 7,40€