Bought 2 units, both work perfectly

Bought 2 units, both work perfectly

Bought 2 units, both work perfectly

Belle lumière pour un prix décent, ne vous attendez pas à être en mesure d'éclairer toute votre allée, mais bon pour les petites zones. Je l'utilise dans mon garage.

nice light for a decent price, don't expect to be able to light up your entire driveway, but good for smaller areas. I use it in my garage.

Belle lumière pour un prix décent, ne vous attendez pas à être en mesure d'éclairer toute votre allée, mais bon pour les petites zones. Je l'utilise dans mon garage.

Small and effective light for external use. I used it to put some light in front of my door. The wires are very thin and stiff.

Small and effective light for external use. I used it to put some light in front of my door. The wires are very thin and stiff.

Small and effective light for external use. I used it to put some light in front of my door. The wires are very thin and stiff.

Pros: Nice packed. Works fine. Cons: The wire is a little bit short. The collor of the wires is : brown and blue for power, black for earth. The black wire was not connected to the lamp housing. This is a serious prob. An other thing is the converter is glued with thermic glue. This is also a serious prob. These 2 probs brings me to a quality of 3 stars. Overall: If you are handy, you can fixed is your self. I've doen it. The case looks nice and the price good. I'll order an other because I need one more.

Pros: Nice packed. Works fine. Cons: The wire is a little bit short. The collor of the wires is : brown and blue for power, black for earth. The black wire was not connected to the lamp housing. This is a serious prob. An other thing is the converter is glued with thermic glue. This is also a serious prob. These 2 probs brings me to a quality of 3 stars. Overall: If you are handy, you can fixed is your self. I've doen it. The case looks nice and the price good. I'll order an other because I need one more.

Pros: Nice packed. Works fine. Cons: The wire is a little bit short. The collor of the wires is : brown and blue for power, black for earth. The black wire was not connected to the lamp housing. This is a serious prob. An other thing is the converter is glued with thermic glue. This is also a serious prob. These 2 probs brings me to a quality of 3 stars. Overall: If you are handy, you can fixed is your self. I've doen it. The case looks nice and the price good. I'll order an other because I need one more.

The 110VAC power goes between the blue and brown leads. The yellow/green lead is still something of a mystery since it does not seem to be a chassis ground. There are no instructions in or on the box. When used on yellow or pale pink roses, this light makes them look snow white at night. There is a good chance the light temperature is a bit more than 3000K. Or it has a wonky CRI (Color Rendering Index). Mounting is one hole in the middle of the bracket flanked by two slots. The hole and slots are suitable for a 1/4 in bolt or screw. An inexpensive solution *if* color accuracy doesn't matter.

The 110VAC power goes between the blue and brown leads. The yellow/green lead is still something of a mystery since it does not seem to be a chassis ground. There are no instructions in or on the box. When used on yellow or pale pink roses, this light makes them look snow white at night. There is a good chance the light temperature is a bit more than 3000K. Or it has a wonky CRI (Color Rendering Index). Mounting is one hole in the middle of the bracket flanked by two slots. The hole and slots are suitable for a 1/4 in bolt or screw. An inexpensive solution *if* color accuracy doesn't matter.

The 110VAC power goes between the blue and brown leads. The yellow/green lead is still something of a mystery since it does not seem to be a chassis ground. There are no instructions in or on the box. When used on yellow or pale pink roses, this light makes them look snow white at night. There is a good chance the light temperature is a bit more than 3000K. Or it has a wonky CRI (Color Rendering Index). Mounting is one hole in the middle of the bracket flanked by two slots. The hole and slots are suitable for a 1/4 in bolt or screw. An inexpensive solution *if* color accuracy doesn't matter.

Very disappointed with this Flood Light, one almost needs a lit candle, to see if it is on. I am a novice when it comes to LED lights, I have noticed that when in a comparison to Incadescent Lamps, that more Light can be obtained, with less Wattage, against an Incadescent light. I therefore expected that 10W LED would give considerable illumination, but sadly I was wrong. I will have to re-evalute my requirements, and procure stronger more powerful lamps. OZturner.

Very disappointed with this Flood Light, one almost needs a lit candle, to see if it is on. I am a novice when it comes to LED lights, I have noticed that when in a comparison to Incadescent Lamps, that more Light can be obtained, with less Wattage, against an Incadescent light. I therefore expected that 10W LED would give considerable illumination, but sadly I was wrong. I will have to re-evalute my requirements, and procure stronger more powerful lamps. OZturner.

Very disappointed with this Flood Light, one almost needs a lit candle, to see if it is on. I am a novice when it comes to LED lights, I have noticed that when in a comparison to Incadescent Lamps, that more Light can be obtained, with less Wattage, against an Incadescent light. I therefore expected that 10W LED would give considerable illumination, but sadly I was wrong. I will have to re-evalute my requirements, and procure stronger more powerful lamps. OZturner.

Wire is short, no instructions. Brown and blue are the 2 supply wires, green with yellow stripe is ground wire. I estimate light output is about equal to that of a 5W globe LED bulb - still suitable for what I have in mind so no complaint. unit seems reasonable quality for the price. ground was properly connected to the metal case on the unit.

Wire is short, no instructions. Brown and blue are the 2 supply wires, green with yellow stripe is ground wire. I estimate light output is about equal to that of a 5W globe LED bulb - still suitable for what I have in mind so no complaint. unit seems reasonable quality for the price. ground was properly connected to the metal case on the unit.

Wire is short, no instructions. Brown and blue are the 2 supply wires, green with yellow stripe is ground wire. I estimate light output is about equal to that of a 5W globe LED bulb - still suitable for what I have in mind so no complaint. unit seems reasonable quality for the price. ground was properly connected to the metal case on the unit.

Overally good value for money but only if you replace the "driver". One used is a capacitor dropper with no earth. it gives 12v in reference to mains voltage (240) not earth.

Overally good value for money but only if you replace the "driver". One used is a capacitor dropper with no earth. it gives 12v in reference to mains voltage (240) not earth.

Overally good value for money but only if you replace the "driver". One used is a capacitor dropper with no earth. it gives 12v in reference to mains voltage (240) not earth.

Wired it up into a lamp to test it (it's destined for a 240V e-bike) and I have to say it puts out a respectable level of light for such a low cost unit.

Wired it up into a lamp to test it (it's destined for a 240V e-bike) and I have to say it puts out a respectable level of light for such a low cost unit.

Wired it up into a lamp to test it (it's destined for a 240V e-bike) and I have to say it puts out a respectable level of light for such a low cost unit.

Dear seller, after measuring the power of this headlamp I found that the power does not exceed 4.7 w

Dear seller, after measuring the power of this headlamp I found that the power does not exceed 4.7 w

Dear seller, after measuring the power of this headlamp I found that the power does not exceed 4.7 w